You can download it by clicking the 'file' name at the bottom of the page.

 

[Firmware update details]

 

① Gsyncloud is changed to -> withCLOUD

 

 

[How to update firmware]

     ① After turning off the power of the dashcams, remove the SD card.

 

     ② After connecting the SD card to the computer, copy and put the arm file downloaded in the Update folder.

   ※ The downloaded file must be decompressed using "Bandizip ( https://www.bandisoft.com/bandizip/ )" and then unpacked as an arm file.

     

                ③ After inserting the SD Card into the dashcams, turn on the power (reconnect the power jack if disconnected).

 

    ④ If the message “Upgrading is in progress” appears after the dashcams is running, the firmware update is in progress.

 

    ⑤ Firmware update takes about 2~5 minutes.

 

    ⑥ When the firmware update is normally completed, you will hear the message “Start recording” (update complete).

 

                ※ This firmware is for G-ON (English) only and cannot be applied to other models.※